Module:Convert/text

From Good Old TV Fan Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

-- Text used by Module:Convert for enwiki. -- This is a separate module to simplify translation for use on another wiki. -- See en:Template:Convert/Transwiki guide if copying to another wiki.

-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram. local SIprefixes = { -- The prefix field is what the prefix should be, if different from the prefix used. ['Y'] = { exponent = 24, name = 'yotta', }, ['Z'] = { exponent = 21, name = 'zetta', }, ['E'] = { exponent = 18, name = 'exa' , }, ['P'] = { exponent = 15, name = 'peta' , }, ['T'] = { exponent = 12, name = 'tera' , }, ['G'] = { exponent = 9, name = 'giga' , }, ['M'] = { exponent = 6, name = 'mega' , }, ['k'] = { exponent = 3, name = 'kilo' , }, ['h'] = { exponent = 2, name = 'hecto', }, ['da']= { exponent = 1, name = 'deca' , name_us = 'deka' }, ['d'] = { exponent = -1, name = 'deci' , }, ['c'] = { exponent = -2, name = 'centi', }, ['m'] = { exponent = -3, name = 'milli', }, ['μ'] = { exponent = -6, name = 'micro', prefix = 'µ' }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC ['µ'] = { exponent = -6, name = 'micro', }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5 ['u'] = { exponent = -6, name = 'micro', prefix = 'µ' }, -- not an SI prefix, but allow for people typing this ['n'] = { exponent = -9, name = 'nano' , }, ['p'] = { exponent =-12, name = 'pico' , }, ['f'] = { exponent =-15, name = 'femto', }, ['a'] = { exponent =-18, name = 'atto' , }, ['z'] = { exponent =-21, name = 'zepto', }, ['y'] = { exponent =-24, name = 'yocto', }, }

-- Some units can be qualified with one of the following prefixes, when linked. local customary_units = { { "US", link = "United States customary units" }, { "U.S.", link = "United States customary units" }, { "imperial", link = "Imperial units" }, { "imp", link = "Imperial units" }, }

-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km"). -- key = { "name", link = "article title", exponent = numeric_key_value } -- If lk=on and link is defined, the name of the number will appear as a link. local eng_scales = { ["3"] = { "thousand", exponent = 3 }, ["6"] = { "million", exponent = 6 }, ["9"] = { "billion", link = "1000000000 (number)", exponent = 9 }, ["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 }, ["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 }, }

-- One of the following categories is included in the text of each message. -- Using the same category for each is simplest. local all_categories = { unit = "", option = "", }

-- For some error messages, the following puts the wanted style around -- each unit code marked like '...%{ft%}...'. local unitcode_regex = '%%([{}])' local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28

-- All messages that may be displayed if a problem occurs. local all_messages = { -- Message format string: $1=title, $2=text, $3=category, $4=anchor. -- Each displayed message starts with "Convert:" so can easily locate by searching article. cvt_format = '[convert: $2]$3', cvt_format2 = '$2$3', cvt_format_preview = 'Error in convert: $1 (help)$3', -- Each of following messages is a table: -- { [1] = 'title', -- mouseover title text -- [2] = 'text', -- link text displayed in article -- [3] = 'category key', -- key to lookup category in all_categories -- [4] = 'anchor', -- anchor for link to relevant section on help page -- regex = gsub_regex, -- replace = gsub_table, -- } Mouseover title text Link text CatKey Anchor cvt_bad_input = { 'input "$1" must be a number and unit' , 'invalid input' , 'option', 'invalid_input' }, cvt_bad_num = { 'Value "$1" must be a number' , 'invalid number' , 'option', 'invalid_number' }, cvt_big_prec = { 'Precision "$1" is too large' , 'precision too large' , 'option', 'precision_too_large' }, cvt_invalid_num = { 'Number has overflowed' , 'number overflow' , 'option', 'number_overflow' }, cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' }, cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' }, cvt_bad_frac = { 'frac "$1" must be an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' }, cvt_bad_prec = { 'Precision "$1" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' }, cvt_bad_sigfig = { 'sigfig "$1" must be a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' }, cvt_empty_option = { 'Ignored empty option "$1"' , 'empty option' , 'option', 'empty_option' }, cvt_deprecated = { 'Option "$1" is deprecated' , '*' , 'option', 'deprecated_option', format = 'cvt_format2' }, cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' }, cvt_unknown_option = { 'Ignored invalid option "$1"' , 'invalid option' , 'option', 'invalid_option' }, cvt_wd_fail = { 'Unable to access Wikidata' , 'wikidata problem' , 'option', 'wikidata_problem' }, cvt_bad_default = { 'Unit "$1" has an invalid default' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, cvt_bad_unit = { 'Unit "$1" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' }, cvt_no_default = { 'Unit "$1" has no default output unit' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' }, cvt_unknown = { 'Unit name "$1" is not known' , 'unknown unit' , 'unit' , 'unknown_unit' }, cvt_should_be = { '$1' , 'ambiguous unit' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace }, cvt_mismatch = { 'Cannot convert "$1" to "$2"' , 'unit mismatch' , 'unit' , 'unit_mismatch' }, cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'bug, ask for help' , 'unit' , 'ask_for_help' }, cvt_lookup = { 'Unit "$1" is incorrectly defined' , 'bug, ask for help' , 'unit' , 'ask_for_help' }, }

-- Text to join input value/unit with output value/unit. local disp_joins = { -- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; " -- [wantname] gives default abbr=off ["or"] = { " or " , "" , " or ", wantname = true }, ["sqbr-sp"] = { " [" , "]" }, ["sqbr-nbsp"] = { " [" , "]" }, ["comma"] = { ", " , "" , ", " }, ["slash-sp"] = { " / " , "" , wantname = true }, ["slash-nbsp"] = { " / ", "" , wantname = true }, ["slash-nosp"] = { "/" , "" , wantname = true }, ["b"] = { " (" , ")" }, ["(or)"] = { " (" , ")", " or " }, ["br"] = { "
" , "" , wantname = true }, ["br()"] = { "
(" , ")", wantname = true }, }

-- Text to separate values in a range. local range_types = { -- Specifying a table requires either: -- * "off" and "on" values (for "abbr=off" and "abbr=on"), or -- * "input" and "output" values (for LHS and RHS); -- other fields are optional. -- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens. -- With "exception = true", that also occurs with "adj=on|abbr=on". -- If "adj" is defined here, that text (unchanged) is used with "adj=on". ["+"] = " + ", [","] = ", ", [", and"] = ", and ", [", or"] = ", or ", ["by"] = " by ", ["-"] = "–", ["to about"] = " to about ", ["and"] = { off = " and ", on = " and ", exception = true }, ["and(-)"] = { input = " and ", output = "–" }, ["or"] = { off = " or " , on = " or " , exception = true }, ["to"] = { off = " to " , on = " to " , exception = true }, ["to(-)"] = { input = " to ", output = "–" }, ["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true }, ["by(x)"] = { input = " by ", output = " × ", out_range_x = true }, ["x"] = { off = " by ", on = " × ", abbr_range_x = true }, ["xx"] = " × ", ["*"] = "×", -- use "*" to replace "x" in Template:Convert/2 which is different from "x" in old [convert: needs a number] ["/"] = " / ", -- for a table of high/low temperatures with 83 / 63
(28 / 17) ["#"] = { off = ", ", on = ", ", abbr_range_x = true, adj = " ± " }, -- to show multiple Wikidata values }

local range_aliases = { -- ["alternative name for a range"] = "standard range name" ["&"] = "and", ["–"] = "-", ["–"] = "-", ["to-"] = "to(-)", ["×"] = "x", ["×"] = "x", ["±"] = "+/-", ["±"] = "+/-", }

-- Convert accepts range text delimited with whitespace, for example, 1 to 2 feet (0.30 to 0.61 m). -- In addition, the following "words" are accepted without spaces, for example, 1–2 feet (0.30–0.61 m). -- Words must be in correct order for searching, for example, 'x' after 'xx'. local range_words = { '-', '–', 'xx', 'x', '*' }

local ranges = { types = range_types, aliases = range_aliases, words = range_words, }

-- Valid option names. local en_option_name = { -- ["local text for option name"] = "en name used in this module" ["$"] = "$", ["abbr"] = "abbr", ["adj"] = "adj", ["comma"] = "comma", ["debug"] = "debug", ["disp"] = "disp", ["frac"] = "frac", ["input"] = "input", ["lang"] = "lang", ["lk"] = "lk", ["near"] = "near", ["order"] = "order", ["qid"] = "qid", ["qual"] = "qual", ["qualifier"] = "qual", ["round"] = "round", ["sigfig"] = "sigfig", ["sing"] = "adj", -- "sing" is an old alias for "adj" ["sortable"] = "sortable", ["sp"] = "sp", ["spell"] = "spell", ["stylein"] = "stylein", ["styleout"] = "styleout", }

-- Valid option values. -- Convention: parms.opt_xxx refers to an option that is set here -- (not intended to be set by the template which invokes this module). -- Example: At enwiki, "abbr" includes: -- ["comma"] = "opt_nocomma" -- As a result, if the template uses abbr=comma, Module:Convert sets: -- parms["opt_nocomma"] = true -- parms["abbr"] = nil -- Therefore parms.abbr will be nil, or will have one of the listed values -- that do not start with "opt_". -- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated. local en_option_value = { -- $=x is handled as a special case: x should be a currency symbol that will be used instead of "$" ["abbr"] = { -- ["local text for option value"] = "en value used in this module" ["comma"] = "opt_nocomma?", -- no numsep in input or output numbers ["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation") ["h"] = "on", -- abbr=on + use "h" for hand unit (default) ["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit ["in"] = "in", -- use symbol for LHS unit ["mos"] = "mos", -- in a range, repeat the input unit (no longer used) ["none"] = "off", -- old name for "off" ["off"] = "off", -- use name for all units ["on"] = "on", -- use symbol for all units ["out"] = "out", -- use symbol for RHS unit (default) ["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km) ["values"] = "opt_values", -- show only input and output numbers, not units ["~"] = "opt_also_symbol", -- show input unit symbol as well as name }, ["adj"] = { ["1"] = "opt_singular", -- unit name is singular when value satisfies: (-1 <= v and v < 0) or (0 < v and v <= 1) ["flip"] = "opt_flip?", -- reverse order of input/output ["j"] = "opt_use_nbsp", -- "join": use " " instead of " " between value and unit name ["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output) ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["off"] = "", -- ignored (off is the default) ["on"] = "opt_adjectival", -- unit name is singular and hyphenated ["pre"] = "opt_one_preunit", -- user-specified text before input unit ["ri0"] = "opt_ri=0", -- round input with precision = 0 ["ri1"] = "opt_ri=1", -- round input with precision = 1 ["ri2"] = "opt_ri=2", -- round input with precision = 2 ["ri3"] = "opt_ri=3", -- round input with precision = 3 }, ["comma"] = { ["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits ["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits ["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark ["gaps5"] = "opt_gaps?", -- deprecated 2015-05-29, was: opt_gaps + opt_comma5 ["off"] = "opt_nocomma", -- no numsep in input or output numbers }, ["debug"] = { ["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible }, ["disp"] = { ["/"] = "or?", -- see "slash" ["2"] = "opt_output_only?", -- display only output value and symbol/name (not input) ["5"] = "opt_round=5", -- round output value to nearest 5 ["b"] = "b", -- join: '(...)' ["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination ["br"] = "br", -- join: '
' ["br()"] = "br()", -- join: '
(...)' ["comma"] = "comma", -- join: ',' ["flip"] = "opt_flip", -- reverse order of input/output ["flip5"] = "opt_flip, opt_round=5?", -- disp=flip + disp=5 ["nocomma"] = "opt_nocomma?", -- no numsep in input or output numbers ["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name) ["or"] = "or", -- join: 'or' ["out"] = "opt_output_only", ["output number only"] = "opt_output_number_only", ["output only"] = "opt_output_only", ["preunit"] = "opt_two_preunits", -- user-specified text before input and output units ["s"] = "or?", -- see "slash" ["slash"] = "or?", -- 2014-11-03: "disp=slash" is now equivalent to "disp=or" as slash is unhelpful ["sqbr"] = "sqbr", -- join: '[...]' ["table"] = "opt_table", -- output is suitable for a table cell with align="right" ["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center" ["u2"] = "opt_output_unit_only?", -- display output symbol/name (not input, and not output value) ["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value) ["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known ["unit2"] = "opt_output_unit_only", ["x"] = "x", -- join: <first>...<second> (user-specified text) }, -- frac=x is handled as a special case: x must be an integer (possibly in local language) = 2 or more -- input=x is handled as a special case: x should be <value><space><unitcode> or <wikidata-property-id> ["lang"] = { -- language for output digits (both en and local digits are always accepted for input) ["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language ["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en) }, ["lk"] = { ["in"] = "in", -- link LHS unit name or symbol ["off"] = "off", -- do not link: same as default except for hand unit ["on"] = "on", -- link all unit names or symbols (but not twice for the same unit) ["out"] = "out", -- link RHS unit name or symbol }, ["near"] = { ["5"] = "opt_round=5?", -- round output value to nearest 5 }, ["order"] = { ["flip"] = "opt_flip", -- reverse order of input/output ["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input }, -- qid=x is handled as a special case: x should be a Wikidata Q item identifier. -- qual=x is handled as a special case: x should be a Wikidata Q item identifier. ["round"] = { ["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5 ["5"] = "opt_round=5", -- round output value to nearest 5 ["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1") ["25"] = "opt_round=25", -- round output value to nearest 25 ["50"] = "opt_round=50", -- round output value to nearest 50 ["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range) }, -- sigfig=x is handled as a special case: x must be an integer (possibly in local language) = 1 or more ["sortable"] = { ["off"] = "", -- ignored (off is the default) ["in"] = "opt_sortable_on?", -- same as "on" ["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit ["out"] = "opt_sortable_on?", -- same as "on" }, ["sp"] = { ["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre") }, ["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions ["in"] = "opt_spell_in", -- spell input value in words ["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase ["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words ["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase }, -- stylein=x is handled as a special case: x can be any text -- styleout=x is handled as a special case: x can be any text }

return { SIprefixes = SIprefixes, all_categories = all_categories, all_messages = all_messages, currency = { ['$'] = true, ['£'] = true }, customary_units = customary_units, disp_joins = disp_joins, en_option_name = en_option_name, en_option_value = en_option_value, eng_scales = eng_scales, ranges = ranges, }